Once the assembly was complete, I found a few problems while testing the mechanical structure to see if it was functioning properly....

On the day of the photograph, my final work was not yet finished, but I first put all the parts together in an easy way to see how it...

Make the big hole first, then the small one The order in which the holes are punched is important. Due to the fact that I changed parts...

I made a mistake when assembling the cabinet, I split the cabinet in to two times to complete the assembly, this led to an error in the...

One tricky part of the CNC for the holes in the wooden door section is that there is a location that needs to be drilled on both sides,...

This was my first time trying wood CNC, and the process required preparing a graphic line drawing, then setting the depth of cut for each...

I chose oak because of both its grain and its colour which is softer and warmer and has an affinity with it. It is also has enough...

I tried to find some existing screws and metal components, but didn't have exactly the right sizes, and materials. So, in order to keep...

As the metal lathe in the studio was not yet allowed to be used by the students, I tried making them by drilling holes and putting screws...

How to write the Artist Statement?

While veneering plywood, I experienced some problems. On my first attempt, I used veneer glue, but not using a bag press which resulted...

Due to the time difference in the production process, it will take longer if I just use metal CNC, therefore, I cut the shape of the gear...

This week I went to the Metal Supermarket at Greenwich to feel the material, like the colour and the weight. Material Selections Brass:...

Based on the idea of using different natural wood grains as decoration, I tried staining the solid wood to deepen the grain, but the...

I tried a couple of metal joints to assemble the cabinet with them, but they would still have parts of them exposed, which would affect...

I researched some exist components for the cabinet Develop the components

How to make the structure more playable? How to make the structure more sustained interactive? I started to think about develop the...

This week, I designed the different gear sets through Gear Generator, then modelled and 3D printed the structures through Solid Works to...

I would like to start with ordinary furniture, break down the traditional usage and add some rituals to life. Therefore, I chose cabinets...